Page 1 of 1

Deltek Swinger

Posted: Wed May 19, 2021 10:11 pm
by Zedboy
New project while waiting for parts to be done on the Zooki Turbo.
As per normal, someone has mucked with this one. :-?
An attempt was made to jam a Honda QA50 engine into it. To do that they've cut the swingarm mounts off and "welded" them to the rear of the frame, then drilled a hole through the frame tubes for the rear engine mount bolt. Nice one dude! :banghead:
So plan is to repair the nasties and return to it's former splendor. :D
IMG20210327165642.jpg
IMG20210327165642.jpg (4.39 MiB) Viewed 163 times
IMG20210327165850.jpg
IMG20210327165850.jpg (2.54 MiB) Viewed 163 times

Re: Deltek Swinger

Posted: Thu May 20, 2021 9:44 pm
by Zedboy
First job is to cut off those swingarm mounts and reposition along with filling the drilled holes in the frame tubes.
IMG20210406173419.jpg
IMG20210406173419.jpg (3.04 MiB) Viewed 161 times
The handlebar mounts have also been buggered with, so more spare holes to fill there.
IMG20210411170133.jpg
IMG20210411170133.jpg (2.97 MiB) Viewed 161 times

Re: Deltek Swinger

Posted: Wed Jun 16, 2021 10:05 pm
by Zedboy
Frame painted. Colour called Soda Orange.
IMG20210425150015.jpg
IMG20210425150015.jpg (5.3 MiB) Viewed 13 times

Re: Deltek Swinger

Posted: Wed Jun 16, 2021 10:07 pm
by Zedboy
Plenty of plating work going on in between jobs.
FB_IMG_1623841009832.jpg
FB_IMG_1623841009832.jpg (19.92 KiB) Viewed 13 times
FB_IMG_1623841005025.jpg
FB_IMG_1623841005025.jpg (25.99 KiB) Viewed 13 times

Re: Deltek Swinger

Posted: Wed Jun 16, 2021 10:12 pm
by Zedboy
Only wish I could do this plating :-?
Chrome work finished and looks bloody fantastic :clap:
IMG20210429180113.jpg
IMG20210429180113.jpg (4.54 MiB) Viewed 13 times